CA FE R/C Boat Racing

[jollyroger]

Hi Randy, I just need to know if that 2" piece of brass tubing is used for the water line through hull feed? If so is it glued in with ca?
I haven't been working on the boat as of late as there have been many other projects to finish, but now at the point where I want to glue the deck onto the hull but need to get the water feed setup correct.
I installed the outlet on the left side of the hull just ahead of the esc, but got it a little high on the deadrise so much that I will have to trim a bit of the lip of the deck around the fitting. I guess not much to it.
cheers John Z
_________________
jollyroger

[RandyatBBY]

I use a bar to hold the tubing and RTV Sylcon to seal.


Uploaded with ImageShack.us
_________________
Randy
bbyracing.com